Brady BMP 91 Guía de usuario descargar pdf (Pagina 87)

6. Maintaining Your Printer

To clean the adhesive build-up in the printer:

1 If the printer is still on, press [Power] to switch it off.

2 Pull the cover latch and open the printer cover.

3 Use a cotton swab with a few drops of at least 95% Isopropyl

alcohol (>= 95% IPA) and wipe away the adhesive.

4 Close the cover firmly so that you can hear and feel that it

latches.

E. Replacing the Platen & Wrap rollers

Your platen roller will wear out faster if you use the printer

to print on tubes. So you may want to keep one set of

platen and wrap rollers for tube printing and another set

for label printing.

As time passes, the print quality may deteriorate visibly because

the bottom part of the platen roller has worn out significantly

You should then replace the rollers:

1 If the printer is still on, press [Power] to switch it off.

2 With one hand, press

and hold the wrap roller

latch.

BMP91UG.book Page 79 Friday, October 14, 2011 7:56 PM

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 105 106

Sin comentarios

Brady BMP 91 Guía de usuario Pagina 87