Brady Wraptor Guía de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Press the Enter DNS Number… button
Enter the DNS Server or WINS Server
Select the OK button
The Wraptor is ready to print and wrap via the Ethernet/TCPIP connection.
4.1.3 Power Up the Wraptor
Step 1. Connect Unit to Power
1. Obtain a suitable alternate power cord if outside of North America. See Power Cord
Specifications on page 2 for appropriate substitutes.
2. Connect the power cord to the back of the Wraptor and into the outlet.
CAUTION: Make sure the outlet is grounded.
Step 2. Power Unit ON
If you haven’t already done so, power on the Wraptor unit. The touch screen automatically
initializes and the Wraptor Control Panel screen appears. See The Wraptor Control Panel on page
29 of this guide for details.
Figure 6. Wraptor Control Panel
Complete the Load Label Material and Load the Printer Ribbon steps to prepare the Wraptor for
printing/wrapping.
16 Wraptor™ User’s Guide
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Comentarios a estos manuales

Sin comentarios