Brady Wraptor Guía de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
Chapter 7 Maintenance
The Wraptor requires periodic maintenance to ensure trouble-free operation. The system uses the Cycle
count to determine when maintenance is required. A maintenance reminder dialog is displayed when the
cycle interval is reached.
7.1 Cleaning
Perform the following cleaning routine when prompted to do so or at least every 5,000 labels to keep the
Wraptor running at optimal performance. The unit comes with a cleaning kit which includes an applicator
bottle and narrow cotton swabs. Fill the bottle with isopropyl alcohol (not included) and follow these
instructions to clean the wrapper surface, printhead, rollers, and sensors.
7.1.1 Before You Begin
Prior to performing any cleaning or maintenance on the Wraptor, you must perform the following steps:
1. Press the Load Labels button on the Setup tab menu. This shuttles the printer to the “shuttle-back”
position.
2. Power off and unplug the Wraptor.
WARNING: You must power off and unplug the Wraptor
prior to performing any cleaning or maintenance!
3. Open the side door on the Wraptor.
4. Remove label material.
5. Close the side door.
NOTE: Remember to reload label material before
attempting to print/wrap labels.
50 Wraptor™ User’s Guide
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comentarios a estos manuales

Sin comentarios