Brady PAM 3000 Manual del operador Pagina 23
- Pagina / 87
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
23Printer-Applicator-System PAM 3000
Mounting
Normally all supplied label applicators have passed a previous run at the factory. Therefore all
units including the pad holder and the pad which are necessary for the operation of the device
are mounted.
But it is possible to dismantle the pad holder and the pad without effort when the label format
is changed. Following it is very easy to mount the new pad holder or pad.
Fig. 5f Changing the pad
Small format Large format
23 32
Changing the pad :
1. Remove the vacuum tube (2) from the pad (3).
2. Loosen the screw on the lower side of the pad (3).
3. Remove the pad (3).
4. Attach the new pad to the pad holder (1).
5. Fasten the new pad on the pad holder (1) using the screw.
6. Attach the vacuum tube (2) to the new pad.
Small format Large format
Fig. 5g Changing the pad holder
1
4
15
Changing the pad holder :
1. Dismount the pad (3).
2. Loosen the screw on the lower side of the cover (4).
3. Remove the cover (4).
4. Loosen the screw (5) at the pad holder (1).
5. Remove the pad holder (1).
6. Attach the new pad holder to the bolt.
7. Fasten the new pad holder by screwing the screw.
8. Mount the cover.
9. Mount the pad.
1
4
- PAM 3000 1
- Printer-Applicator-System 1
- PO Box 2131 2
- Milwaukee, WI 53201 U.S.A 2
- 6555 W. Good Hope Road 2
- Table of Contents 4
- Appendices 5
- Operator's Manual 7
- Further Documentation 7
- Trademarks 7
- 1 Product Description 8
- Technical Specifications 9
- Optional Features 11
- Print Media 12
- 2 General Safety Instructions 15
- 3 Delivery Contents 15
- 4 Component Location 16
- Applicator 19
- 5 Mounting the Applicator 20
- Slide Valve 21
- Pad Unit 22
- 6 Connecting the Printer 25
- Interface Connections 26
- Connection to Power Supply 27
- 7 Media Loading 28
- Loading Labels 29
- Loading Transfer Ribbon 30
- 8 Adjustments 31
- 9 Control Panel 35
- System Mode OFFLINE 36
- System Mode PRINT 36
- System Mode PAUSE 36
- System Mode LABEL FROM CARD 36
- 10 Setup 37
- 11 Printer Info Display 40
- Example of ASCII Dump Mode 43
- 13 Operation 44
- Switch on the Printer 45
- Standard Operation 46
- 14 Optionen 48
- Memory Cards 50
- Warning Light 53
- Warning Sensors 54
- Service Unit 56
- Antistatic Brush 57
- Error Messages 59
- Problem Solution 65
- Cleaning the Printhead 67
- PLC Interface Port 72
- Scanner Connector 76
- EU - Conformity Declaration 87
Relacionado con productos y manuales para Impresoras De Etiquetas Brady PAM 3000
(25 paginas)Samsung SP-D570BK manuály
Uživatelské manuály a uživatelské příručky pro ne Samsung SP-D570BK.
Poskytujeme 1 manuály pdf Samsung SP-D570BK ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentarios a estos manuales