Brady PAM 3000 Manual del operador descargar pdf (Pagina 53)

53Printer-Applicator-System PAM 3000

Warning Light

By using the warning light it is possible to recognize the state of the printer with one view.

Fig. 14e Connection of the warning light

It is recommended to fix the warning light (1) at a bracket or a plate. For that purpose there

are a plate and suitable screws included in the delivery contents of the light.

The warning light has to contact to the printer by inserting the connection cable (2) of the

warning light into the 4-pin connector (3).

During the operation the lamps have following functions :

green Device is switched on, voltage is available.

yellow Warning : labels respectively transfer ribbon have passed the

preset minimum quantity.

Function is only available when the warning sensor label end

is mounted.

red Printer error

Further information about the kind of error is shown on the display.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 86 87

Sin comentarios

Brady PAM 3000 Manual del operador Pagina 53