Brady THT-BP Precision Manual del operador descargar pdf (Pagina 41)

41Transfer Printer THT-BP Precision

Fig. 7d Feed path in Tear-off Mode

8. Slide the media guide ring (6) inward until it lightly touches the side of the

media strip.

7. Media Loading

4. Swing the media retainer (11) downwards until it touches the media hub

(9). Push the media retainer against the supply role until it rests against

the label media. Tighten the knurled screw (10).

5. Raise the printhead assembly (2) by rotating the lever (7) clockwise until it

stops.

6. Slide the media guide ring (6) outward, allowing enough clearance for the

label stock's width when loaded.

7. Slide the media strip underneath the swing (5 /BP Precision 200/300:

axle) and through the adjustable photocell assembly (3) until it comes out

of the front of the printer. If you are using labels that are wound-in, please

make sure that you slide the media strip over the internal rewind hub (13).

In figure 7d the feed path for labels wound-out is represented by a solid

line, and the feed path for wound-in labels is represented by a broken line.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 131 132

Sin comentarios

Brady THT-BP Precision Manual del operador Pagina 41