Brady THT-BP Precision Manual del operador descargar pdf (Pagina 46)

46 Transfer Printer THT-BP Precision

Loading Fanfold Labels

1. Open the cover.

2. Loosen the knurled screw (7) and slide the media guide (6) to its

outermost position. Rotate the media guide (6) downwards past the media

retainer (5).

3. Place the stack of media (4) behind the printer. Make sure the labels on

the media strip are facing up.

4. To raise the printhead assembly (2), rotate the lever (1) clockwise until it

stops.

5. Slide the media guide ring (3) outward, allowing enough clearance for the

media's width when loaded.

6. Slide the media strip through the printer as shown in figure 7i.

7. Adjust the label edge sensor so, that the sensor can recognize the space

between the labels respectively the reflective or the perforation mark.

8. Slide the media guide (6) inward until it lightly touches the side of the

media strip. Rotate the media guide (6) upwards against the media

retainer (5) and tighten the knurled screw (7).

Fig. 7i Loading Fanfold Labels

7. Media Loading

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 131 132

Sin comentarios

Brady THT-BP Precision Manual del operador Pagina 46