Brady THT-BP Precision Manual del operador descargar pdf (Pagina 43)

43Transfer Printer THT-BP Precision

7. Media Loading

22 23 13 2419 20 21

Fig. 7f Loading Labels from Roll in Peel-off mode

12. For peel-off mode swing the locking system (18) away from the rewind

assist roller (20).

13. Remove all labels from the media strip hangig out of the printer. Then,

slide the strip (22) around the dispense plate (16) to the internal rewind

hub (13) as shown in figure 7f. Slide the strip under the clamps (23) that

are located on the internal rewind hub (13). Hold the internal rewind hub

(13) and rotate the nut (24) counter-clockwise until it is tight. The media

strip will now be fastened to the internal rewind hub (13). Rotate the

internal rewind hub (13) counter-clockwise to tighten the media strip.

14. Loosen the screw (19) using the Allen key (21).

Align the locking system (18) including the pinch roller (17) by sliding it

sidewards. The alignment is correct if the pinch roller (17) is placed in the

middle of the label strip.

15. Swing the locking system (18) to the rewind assist roller (20) and tighten

the screw (19).

16. For further informationen about operating in the peel-off mode see

appendix A.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 131 132

Sin comentarios

Brady THT-BP Precision Manual del operador Pagina 43